Substrate -
It must be hard & dry. Applicable surface
is plaster board, silicate board, plywood,
mortar, plaster, etc. Flat surface is required.
Avoid the application on wall paper, polystyrene
material, place located at outside, on water
splashed, etc.
Rybra Primer -
Use roller and apply the Rybra Primer. It
is required to apply twice or more if the
substrate has a water absorption though it
is applied once.
Rybra Base Coat -
Use trowel and cover all substrate with even
1 to 1.5 mm thickness, and then create pattern
according to the pattern by the approved
sample in 20 minutes of the application of
Rybra Body Coat. It is required to cover
more than 48 hours for curing and next step.
Rybra Antique Wax -
According to the approved sample, use cloth,
sponge or brush to apply the Rybra Antique
Wax like drawing circle.
.